---
title: "Cloud Print Connector 1.3 - Webservice with Interactive Login"
slug: "cloud-print-connector-13-webservice-with-interactive-login"
description: "This short guide explains how to set up and use Lasernet Cloud Print Connector, focusing on the web service with interactive login. "
updated: 2026-03-04T09:17:11Z
published: 2026-03-04T09:17:11Z
canonical: "kb.lasernetgroup.com/cloud-print-connector-13-webservice-with-interactive-login"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://kb.lasernetgroup.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Cloud Print Connector 1.3 - Webservice with Interactive Login

This page explains how to set up and use Lasernet Cloud Print Connector 1.3, focusing on the Web service with interactive login.

No prerequisites are necessary.

> [!NOTE]
> Note
> 
> Web service printing only works for the entity you have downloaded the config for. On any other entity, the print job remains unhandled.
> 
> This is currently a Web service limitation. Therefore, we advise using Azure Service Bus (ASB) and Azure Storage.

## Download the Cloud Print Connector

1. In Dynamics 365 Finance and Operations, navigate to **Lasernet** > **Setup** > **Lists** > **Printers**.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-1V9PH0BU.png)

1. Click **Download** on the Action pane and select **Download Lasernet Cloud Print Connector (Basic)** from the dropdown menu.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-NFN9K9RX.png)

1. Once the download is complete, open the file. A setup wizard will open.
2. Click **Next** to proceed and then click **Install** to begin the installation. It should not take long.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-IHBYWGW2.png)

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-ZG7HEP1Q.png)

1. A prompt may appear asking to delete the existing connector. Click **OK**.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-M97QO8CJ.png)

1. Once the installation is complete, click **Finish**.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-VGX8QGNK.png)

## Configure Cloud Print Connector

1. Navigate back to the **Printers** page of Lasernet FO Connector and open the **Download** dropdown menu. This time, select **Open Lasernet Cloud Print Connector-configuration**.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-MIYOJ2RA.png)

1. A **Select Cloud Print method** dialogue will open. Choose **Web service** from the **Output type** dropdown menu. Then, click **OK**.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-HCCDVGWF.png)

1. A prompt may appear asking you to allow the page to open the Cloud Print Connector application. Click **Open**.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-MGCK8EJ1.png)

1. A prompt may appear asking you to load the configuration file. Click **Yes**.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-87OT6MC6.png)

1. A **Configuration updated** notification will appear. Click **OK**.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-LM0545JK.png)

1. The Cloud Print Connector opens. Sign in.
2. Select your account from the list.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-7LN2SMKB.png)

After a moment, you will be redirected to the **Printers** page.

1. Refresh the page.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-GY7GEFYA.png)

Now, a list of available printers is visible.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-JH7IHERG.png)

## Cleanup Options

1. Navigate to **Lasernet** > **Setup** > **Cloud print connector setup** > **Parameters**.
2. Under **Web service (Interactive login)**, you can set various parameters, including:

- **Polling interval**
- **Maximum number of print-jobs per request**
- **The duration of a print job lock**
- **Print job marked as handled** - When the print job is marked as handled.
  - **After each print job**
  - **After all print jobs**
  - **Never**
- **Max print job attempts** - Once Lasernet FO Connector provides the print job to Lasernet Cloud Print Connector, you can set the maximum number of print job attempts.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-7K7MRM6A.png)

1. To automate the cleanup of old print jobs, navigate to **System administration** > **Period tasks** > **Batch job history clean-up**. Here, you can find the Lasernet Cloud Print cleanup job. This batch task is automatically created when printing the first document to Lasernet Cloud Print Connector via the Web service, but it is also possible to start it within the **Parameters** page for Lasernet Cloud Print Connector.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-2B6BEDYX.png)

1. Click **Create cleanup batch job** to view the details.

Under the **Parameters** section, you can set the criteria for deleting old print jobs, such as jobs that have been handled, are older than a certain number of minutes, or have exceeded the maximum number of attempts. This helps keep your print queue clean and organized.

## Web Service Print Jobs

A new form called **Web service print jobs** has been introduced in the **Parameters** page for Lasernet Cloud Print Connector 1.3. To access it, navigate to **Lasernet** > **Setup** > **Cloud print connector setup** > **Web service print jobs**.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-UGCX989X.png)

On this form, you can view your handled and unhandled print jobs.

Settings for the form are found at **Lasernet** > **Setup** > **Cloud print connector setup** > **Parameters** > **Web service (Interactive login)**.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-I4WCQKWJ.png)

The configuration used for this example is:

- **Polling interval** set to **20** seconds so that the user can navigate to **Web service print jobs** and save the document to PDF while the status of the print job is still **Unhandled**. After the document is saved to PDF, the status is changed to **Handled**.
- **Print job marked as handled** set to **After each print job**.

The following steps describe how to use the Cloud Print Connector via the Web service. A physical printer is not necessary, as Microsoft Print to PDF can be used to validate that the process works by printing a report that includes an attachment.

1. Navigate to **Sales and marketing** > **Sales orders** > **All sales orders**.
2. Select a sales order and click **Confirmation** from the **Generate** group of the **Sell** section of the Action pane.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-IB8PZWZ8.png)

1. In the **Confirm sales order** window, click **Printer setup** and select **Confirmation**.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-0ER87G4Q.png)

1. Ensure **Microsoft Print to PDF** is selected in **Lasernet Print** > **Printer name**. Then, click **OK**.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-FX3REWO3.png)

1. Click **OK** again.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-1CLU2CD7.png)

The system will now process the operation.

1. To check the status of the print job, navigate to **Lasernet** > **Setup** > **Cloud print connector setup** > **Web service print jobs**.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/image-TFQVEER3.png)

The print job is listed as **Unhandled**. After a moment, a **Save print output as** dialogue opens.

1. Name the file **Print of Report** and click **Save**.

The job’s status has now changed from **Unhandled** to **Handled**.

1. Repeat the process for a second file, which you will name **Print of Attachment** and save it as well.

After refreshing the page, both jobs are marked as **Handled**.