---
title: "DOCX Output (Add Image and Barcode) - Lasernet Form Editor 9"
slug: "docx-output-add-image-and-barcode"
description: "In this exercise you will, download and import the attached configuration called 04. DOCX Output (Add Image and Barcode) in Lasernet Developer 9. "
tags: ["Barcodes", "DOCX", "Images", "Lasernet 9 ", "Lasernet Developer"]
updated: 2026-03-06T07:52:44Z
published: 2026-03-06T07:52:44Z
canonical: "kb.lasernetgroup.com/docx-output-add-image-and-barcode"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://kb.lasernetgroup.com/llms.txt
> Use this file to discover all available pages before exploring further.

# DOCX Output (Add Image and Barcode)

**Applies to:** Lasernet 9

In the current exercise, you are proposed to edit a header of the output by inserting an image and a barcode. To this end, follow the steps listed below.

> [!NOTE]
> Note
> 
> This article describes a software version that is no longer supported. Although the software will no longer receive updates or technical support, existing documentation, such as this article, will be retained for reference purposes but will no longer be updated. If you have any questions, contact [Lasernet Support](https://support.lasernetgroup.com/new-ticket).

Download and import the attached configuration called **04. DOCX Output (Add Image and Barcode) in Lasernet Developer** 9. Afterward, navigate to the **Forms** section and open the **Sample** form.

1. Click the **View Gridlines** button to show lines of all grids available in the output to make the document formatting easier.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/1628258453484.png)

1. Click the **Header** button to activate the edit mode.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/1628258455033.png)

1. Insert an image from the external file. Once the image is inserted, drag one of the control points on the sides or corners of the selection box. The following image illustrates what the image in the header should look like after resizing it.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/1628258454396.png)

1. Drag the **orderid** field from the input to the second column of the table in the header of the output.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/1628258454748.png)

1. Select the item, and then click the **Properties** button.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/1628258455337.png)

1. In the box that appears, select **Bar Code** from the **Content Type** drop-down box, select **QR Code** from the **Symbology** drop-down box, clear the **Show Data** check box and select the **Auto-Module** check box.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/1628258453939.png)

1. Once the barcode is inserted, drag one of the control points on the sides or corners of the selection box. The following image illustrates what the barcode in the header should look like after resizing it.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/1628258454164.png)

1. To exit the edit mode of the header, double-click anywhere in the output. Afterwards, click the **View Gridlines** button to hide lines of grids.

![](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/1628258455634(1).png)

## Attachments

- [04.-DOCX-Output-Add-Image-and-Barcode.lnconfigx](https://cdn.document360.io/c831ef63-c6b3-48ee-b443-3e33644e4e2e/Images/Documentation/04.-DOCX-Output-Add-Image-and-Barcode.lnconfigx)